Bleeding and Filling
1. Bleed your lighter each time you refi ll it.
2. Release all tank pressure by pressing on the inlet valve with a small screwdriver lighter upside down while bleeding valve and repeat until all fuel/gas pressure is released.
3. Holding upside down, insert butane tank tip directly on the fuel valve. Press down fi rmly for about 5 seconds.
4. Before igniting lighter, wait 3-4 minutes for excess butane to evaporate and butane inside lighter to reach room temperature.
5. Set fl ame level to desired height by turning flame adjuster wheel.



Shipping: The product can only be shipped through by sea, please don`t shipping by air.
Caution: Extremely flammable aerosol.Pressurized container. May burst if heated. Keep away from heat, hot surfaces,sparks, open flames and other ignition sources. No smoking. Don`t spray on an open flame or other ignition source. Don`t pierce or burn, even after use. Protect from sunlight. Don`t expose to temperatures exceeding 50℃. Don`t incinerate or burn the empty can after use. Keep out of reach of children.
Warning: Failure to follow instructions may result in burn injury.

First Aid: if poisoning occurs, please seek medical advice or call the poisons information center.